Control Systems

ABET DB-25 Cable - 50 Feet
ABET DB-25 Cable - 50 Feet

Model 81406-50

These cables connect interface to test chamber.

ABET Full I/O Module Connection Block
ABET Full I/O Module Connection Block

Model 81408

This Full I/O Block provides 16 input and 32 output line connections when used with the 81400 series interface modules.

ABET 2G Starter Interface - Latched
ABET 2G Starter Interface - Latched

Model 81501

This base unit may be used to support two test stations with 8 Inputs and 15 Output each or a single test station with 16 Inputs and 30 Outputs.

ABET 2G Expansion Interface - Latched
ABET 2G Expansion Interface - Latched

Model 81502

This unit stacks on top of the 81501 to support additional chambers. There are no cards to install or cables to connect between modules.

30V DC Power Supply for 220V/50Hz Power
30V DC Power Supply for 220V/50Hz Power

Model 83619*C

This unit is identical to 83619 except that it requires a line voltage of 220-230 V AC @ 50 Hz

ABET 2G Full I/O Module Connection Block
ABET 2G Full I/O Module Connection Block

Model 81508

This Full I/O Block provides 16 input and 30 output line connections when used with the 81500 series interface modules.

ABET 2G Starter Interface - Non-Latched
ABET 2G Starter Interface - Non-Latched

Model 81501-NL

This base unit may be used to support two test stations with 8 Inputs and 15 Output each or a single test station with 16 Inputs and 30 Outputs.

ABET Mini I/O Module Connection Block
ABET Mini I/O Module Connection Block

Model 81409

This Mini I/O Block provides 8 input and 15 output line connections to the ABET Interface modules.

ABET 2G Expansion Interface - Non-Latched
ABET 2G Expansion Interface - Non-Latched

Model 81502-NL

This unit stacks on top of the 81501-NL to support additional chambers. There are no cards to install or cables to connect between modules. Standard DB-25 cables connect between the interface and the chamber I/O connection block.

ABET DB-25 Cable - 25 Feet
ABET DB-25 Cable - 25 Feet

Model 81406-25

This cable connects the test chamber I/O connection block to the interface module.

ABET DB-25 Cable - 10 Feet
ABET DB-25 Cable - 10 Feet

Model 81406-10

This cable connects the test chamber I/O connection block to the interface module.

ABET I/O Module Base
ABET I/O Module Base

Model 81412

This 9 x 9 inch plastic baseboard can be used to mount the I/O Modules.

ABET 2G PCIe Interface Card and Cable
ABET 2G PCIe Interface Card and Cable

Model 81504e

A single computer PCIe circuit board and 100 conductor ribbon cable now connect directly to the ABET 2G Starter Interface to support from 1–12 test chambers.



Submit a simple form and we will respond promptly.

Copyright © 2022 Campden Instruments. All Rights Reserved.

Product Search

Use the provided form to search for products on this website.