Complete Slice Workstation
 

Complete Slice Workstation

Model 746-SCS

 

Intended for the simultaneous evaluation or observation of slices in an Interface or Submerged type chamber. It has been designed specifically to match Campden's range of slice chambers.

   

Details

The 746-SCS Slice Workstation is intended for the simultaneous evaluation or observation of 4 slices in an interface type chamber. It has been designed specifically to match Campden's range of slice chambers.

The 7450 slice chamber, available separately, is mounted on the anti-vibration table under the camera assembly. The camera assembly houses 2/4 ccd colour cameras, each of which is individual adjustable for focus. The camera assembly is swung upwards away from the chamber for easy access to the slice chamber. In its raised position the camera assembly is supported by a gas spring strut. In its lowered position it is held in place by a locking clamp.

Combined with a 17" monitor (4:3 aspect) and quad processor, the slices are displayed at 50x magnification in single display mode or at reduced magnification when all four slice positions are displayed simultaneously on the monitor. The lenses for this system have been chosen to give a longer working distance at higher magnifications. When this system is configured for the higher magnification potentials a proportionately smaller field of view is available. This would normally require more accurate positioning of each individual slice. To alleviate this situation, each camera is adjustable for x-y position by up to +/- 3mm and an angular adjustment of +/- 15°. This version can be configured to give magnifications of up to 100x.

SYSTEM INCLUDES

  • Support frame and passive anti-vibration table
  • Camera assembly 2/4 cameras (50x or 100x)
  • Camera power supply
  • Quad processor
  • TFT video monitor

Downloads

Product Manuals

Accessories

Optional Accessories

Left Hand Micromanipulator
Left Hand Micromanipulator
Model 746-MM-LH

This is a compact micromanipulator for manual movement in three axes (X, Y, and Z).

Right Hand Micromanipulator
Right Hand Micromanipulator
Model 746-MM-RH

This is a compact micromanipulator for manual movement in three axes (X, Y, and Z).

Integrally Mounted Cold Light Source
Integrally Mounted Cold Light Source
Model CL200-1

To facilitate the careful slicing operation, it is most important that the progress of the blade through the tissue be clearly observed.

Dual channel PTFE chamber system for Electrophysiology with heater & thermistor feedback control
Dual channel PTFE chamber system for Electrophysiology with heater & thermistor feedback control
Model CI.7450-2P(E)

The new all-in-one chamber design incorporates the best features of both the old Haas or interface type cell and the old Oslo or submerged type cell.

Dual channel Acrylic chamber system for Electrophysiology with heater & thermistor feedback control
Dual channel Acrylic chamber system for Electrophysiology with heater & thermistor feedback control
Model CI.7450-2A(E)

The new all-in-one chamber design incorporates the best features of both the old Haas or interface type cell and the old Oslo or submerged type cell.

Quad channel Acrylic chamber system for Electrophysiology with heater & thermistor feedback control
Quad channel Acrylic chamber system for Electrophysiology with heater & thermistor feedback control
Model CI.7450-4A(E)

The new all-in-one chamber design incorporates the best features of both the old Haas or interface type cell and the old Oslo or submerged type cell.

Quad channel PTFE chamber system for Electrophysiolgy with heater & thermistor feedback control
Quad channel PTFE chamber system for Electrophysiolgy with heater & thermistor feedback control
Model CI.7450-4P(E)

The new all-in-one chamber design incorporates the best features of both the old Haas or interface type cell and the old Oslo or submerged type cell.

Copyright © 2022 Campden Instruments. All Rights Reserved.

Product Search

Use the provided form to search for products on this website.